Legsport Duckbill Install

Finally. The day has come to install this beauty. Below, I will go over every step I took to install the Legsport Duckbill (since no one has made a DIY yet.)


I will also post this DIY to the FT86 forum for a second reference.

Things you will need for the installation:

  • Microfiber Cloth(s)
  • Detailing Spray (Meguiar’s: Quik Detailer)
  • 3M double-sided mounting tape (Might be provided with purchase of Duckbill)
  • Optional: A friend to help
  • Time of Install: 5 – 30 minutes

Step One: Clean and make sure that no residue or packaging material is on the Duckbill. I suggest using Meguiar’s: Quik Detailer and a microfiber cloth (shown in step three). These will do the best job possible for getting anything off the Duckbill.

Step two: Prepare the duckbill by taping along the edges and curve crease. Be prepared to use all the tape provided! As you can see, I was given enough tape just to tape the important parts of the Duckbill, so please follow my tape pattern for optimal fitment.


Step 3: Once Duckbill has been prepped, proceed to clean the surface area of the trunk to prevent from any residue getting onto the tape of the Duckbill. We don’t want anything getting in the way and create a pocket for wind to get in! Again, I recommend Meguiar’s: Quik Detailer and a microfiber cloth to clean this area.


Step 4: Now that you have the surface cleaned, Duckbill cleaned and prepped with tape, and your helping buddy is ready – you can now proceed with placing the Duckbill onto the trunk. Be sure to remove the tape cover before placing the Duckbill on the trunk. This is where teamwork and communication is needed so that the Duckbill is placed on properly.

Step 4.1: I’m sure most of us may not have a buddy available to help and are doing the install ourselves. That is okay! I did this install myself and was relieved to know that this install was easy. Before removing the tape cover, place the Duckbill onto the trunk and position accordingly. Once positioned, lift the duckbill slightly so that you can remove the tape cover as you are firmly pressing the Duckbill onto the trunk.


Step 5: VIOLA! You have successfully installed your new Legsport FR-S/BRZ/TOYOTA86 Duckbill. Please be sure to secure the Duckbill by pushing down on the areas taped down to ensure that the tape makes contact with both the trunk and the Duckbill. Apply moderate pressure. I recommend giving the tape 2 – 3 days to settle before going on the roads. Unless you are a Dare Devel like me, you wait a day and drive up to 80 MPH/129 KPM (Legally, of course). Don’t be me.

You might be asking yourself “How does he know how to install Duckbills?” Well, I don’t, but that’s the fun part to modifications! If you have any questions or concerns or possibly made a few mistakes along the way, feel free to contact me¬†and I will answer any questions you have.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s